Maxiboard is an extremely high performance and versatile acoustic building board. Maxiboard can be used to dramatically increase the acoustic performance of both existing and newly constructed walls and ceilings. The Maxi Beam and Block Ceiling system is ideal in situations where Building Regulations Part E compliance is required along with a 1 hour fire separation. Simply installed below the Rackham Housefloors beam and block floor, the Maxi Beam and Block ceiling system minimises loss of room height.
|Maxi Beam and Block Ceiling|
|Maxi Beam and Block Ceiling||51||47||52|
Acoustic tests carried out by SRS Ltd in accordance with BS EN ISO 140 parts 4 and 7. Rated to BS EN ISO 717 parts 1 and 2. Test references EXET03-04
|Maxi Beam and Block||Loadbearing Capacity||Integrity||Insulation|
|Fire Resistance BS EN 1365-2: 2000||132 minutes||132 minutes||132 minutes|
Fire resistance tests carried out 21/12/2004 by Warrington Fire Research Centre. WFRC Test Report No 143085
SRS have approved stockists and specialist distributors nationwide that would be delighted to assist. Most distributors provide a variety of services including site surveys, product specification, and supply and installation of SRS products.Find a distributor
If you would like a small sample of any of our high performance acoustic products please access the sample request form using the link below. Samples are usually dispatched within 48 hours of the form being submitted.Request a product sample here
Our professional, Institute of Acoustics registered technical department is on hand to give advice on all of our high performance acoustic products. We're delighted to offer advice on any noise problem, be it a sound insulation or sound absorption issue.