Raincheck - Installation Guide

Prior to installation, it is essential that the surface to be treated with Raincheck is clean and dry.

Raincheck is quickly and easily installed on the metal profiled sections. Simply remove a section of the backing paper and adhere the Raincheck strip to the metal profile. The lightweight, flexible material will easily mould to the contours of the roofing system.

Work your way along the profile in small stages, removing small sections of the backing paper and compressing the rain check material to the profile as you go. Ensure that there are no air pockets in the material. If an air pocket develops, you can burst the pocket with a trimming knife and press the material back down.
 

 

Moderate hand pressure should be fine to achieve a good bond, however, if a stronger bond is required, a hand roller can be used ensure a more even application of pressure across the surface of the Raincheck.
 

 

For the best results SRS recommend that a surface area equivalent to 60% of the total roof size is treated with the Raincheck product, using an even distribution of the material across the space.

 

Click here to see a demonstration: Raincheck on YouTube

Download PDF: